Acetate Card - PROJECT
Designed By:
Dave Velez
Crafting Time: 1 hrs
Drying Time: 30 minutes
Skill Level: Beginner to Intermediate
Marvy Products Used:
Crafting Time: 1 hrs
Drying Time: 30 minutes
Skill Level: Beginner to Intermediate
Marvy Products Used:
- Marvy®/Uchida Jumbo Bistro marker, item#481- Pink
- Marvy®/Uchida Pink Tinted Embossing Ink Pad, item#75
- Glue Tape
- Acetate card front – scored
- Acetate card front – not scored
- Black Stardreams paper
- Impression/Obsession cling stamp
- Apple Pie Memories Acrylic Block
Designed By:
Dave Velez
Crafting Time: 1 hrs
Drying Time: 30 minutes
Skill Level: Beginner to Intermediate
Instructions:
Crafting Time: 1 hrs
Drying Time: 30 minutes
Skill Level: Beginner to Intermediate
Instructions:
- Take scored piece of acetate and fold over to crease.
- Using Jumbo Pink Bistro marker, scribble across front – side to side, top to bottom.
- Place your cling stamp on the acrylic block, ink with the Pink Tinted Embossing Ink Pad.
- Place inked stamp carefully onto wet inked paper, applying firm pressure, making sure stamp does not shift. When the stamp is lifted off the chalk ink will come with it, leaving the impression.
- Heat set with heat gun, making sure not to put the heat gun too close to the acetate. Acetate will melt or buckle if too close to the heat.
- Assemble card:
a. Before attaching stamped acetate to back of card, take unscored acetate, place small pieces of tape in the corners and adhere to the front of the stamped acetate. This will protect the stamped image.
b. Attach acetate to black piece of card stock using tape runner.
Designed By:
Dave Velez
Crafting Time: 1 hrs
Drying Time: 30 minutes
Skill Level: Beginner to Intermediate
Instructions:
Crafting Time: 1 hrs
Drying Time: 30 minutes
Skill Level: Beginner to Intermediate
Instructions:
- Take scored piece of acetate and fold over to crease.
- Using Jumbo Pink Bistro marker, scribble across front – side to side, top to bottom.
- Place your cling stamp on the acrylic block, ink with the Pink Tinted Embossing Ink Pad.
- Place inked stamp carefully onto wet inked paper, applying firm pressure, making sure stamp does not shift. When the stamp is lifted off the chalk ink will come with it, leaving the impression.
- Heat set with heat gun, making sure not to put the heat gun too close to the acetate. Acetate will melt or buckle if too close to the heat.
- Assemble card:
a. Before attaching stamped acetate to back of card, take unscored acetate, place small pieces of tape in the corners and adhere to the front of the stamped acetate. This will protect the stamped image.
b. Attach acetate to black piece of card stock using tape runner.
